Planning, process & cost
What does a carpenter do, and when should you hire one?
Choosing the right trade for doors, fitted furniture, floors and renovation timberwork.
Last updated

A carpenter measures, cuts, fits and repairs timber and wood-based materials in a building. Hire one when the result depends on accurate fitting, secure fixings or joinery made for the shape of your home: internal doors, skirting, fitted wardrobes, alcove shelving, timber flooring and similar work. For a renovation, involve the carpenter before ordering fitted items or closing up walls. DP Carpentry Property Services is based in Kent and offers carpentry and renovation across its Kent, South East London, east Surrey and East Sussex border coverage. This guide explains how to decide what your project needs, rather than treating every household repair as the same kind of job.
Start with the thing you want to change
The most useful starting point is the outcome, not the name of a trade. A door that scrapes on the floor may need its hinges reset, its frame checked or the clearance adjusted after new flooring. Asking for a new door before the cause is understood can commit you to the wrong solution. Equally, a cupboard that looks too small may be limited by the layout of its shelves rather than by the room around it.
Describe what is not working and what you would like instead. For fitted storage, that might mean room for long clothes, books of different heights or equipment that needs cable access. For a floor, it could mean replacing a worn surface while keeping the existing doors and skirting. These descriptions let the work be scoped around how the home is used, rather than around a product chosen in isolation.
Carpentry and joinery: what is the difference?
In general trade usage, carpentry often describes timber work fitted on a building site, while joinery often describes making items with closely fitted joints, sometimes in a workshop. In domestic work the terms overlap. A fitted bookcase needs both a well-made cabinet and careful installation against walls that may not be straight. The label alone does not tell you whether someone is the right person for that bookcase.
Ask about the particular type of work instead. Door hanging, installing a kitchen and building an alcove unit require different setting-out decisions, even though all can involve carpentry. Look at relevant examples in the projects section and explain the finish you want. If you need painted cabinetry, say that; if you want exposed timber, the material, joint details and finishing method become part of the brief.
First fix and second fix in a home renovation
First fix is generally the work done before walls are closed and plastered. On a renovation it can include timber partitions, door linings and support within walls for later fittings. Second fix is generally the visible finishing stage: hanging doors, installing architrave and skirting, fitting cabinets and completing other joinery. The exact division depends on the project, so it is better to agree a sequence than to rely on the labels.
This matters when a room is being replastered or several trades are involved. A heavy wall-mounted unit may need support planned before the plasterboard goes on. Floor thickness affects the clearance beneath doors. A kitchen needs its service positions considered before the units conceal them. Talk through the intended layout while changes are still easy to make, then confirm when each fitted item should be measured and installed.
When accurate fitting makes a carpenter worthwhile
A small item can still demand skilled work. Internal doors need even gaps, hinges that carry the leaf correctly and a latch that meets its keep without forcing. Skirting has to meet corners and door trim neatly. Shelves need support appropriate to their span and contents. These are fitting problems rather than simply assembly tasks, and an uneven opening or wall can turn an apparently straightforward replacement into a more involved job.
Made-to-measure work becomes particularly useful where standard furniture leaves wasted space. Chimney-breast alcoves, sloping ceilings and narrow bedrooms call for a design that follows the room while keeping shelves and doors usable. Before deciding on a full replacement, ask whether the existing timber or fittings are sound enough to keep. A careful repair and a redesigned internal layout are different options, and the quote should make clear which is proposed.
Know where other trades are needed
Carpentry does not make electrical, plumbing or structural questions disappear. A media wall may involve power and lighting as well as timber framing. Kitchen fitting may involve water connections, appliances and a worktop supplied by a specialist. If the job changes supporting structure, seek appropriate design advice rather than assuming a carpenter can make the decision during installation. The responsibilities should be agreed before work starts.
DP's renovation page describes coordination with other trades. For your own project, ask exactly which parts are included and which need a separate appointment or specialist. Also check who makes good the walls and who decorates afterwards. In listed buildings, or where a lease controls alterations, permission may be a separate issue from the practical ability to fit an item. Resolve that before removing original joinery or ordering new materials.
What affects the price without relying on a price list
A carpentry price depends on the work, materials and conditions at the property. The size of a wardrobe run is only one factor: door construction, drawer mechanisms, finish and the amount of scribing around uneven surfaces all change the scope. A group of internal doors may need different frame repairs or hardware even when the doors themselves look alike. Comparing prices without comparing these details is rarely useful.
Access and preparation also matter. Removing old fitted furniture, protecting a finished floor, carrying sheet materials upstairs and working around an occupied kitchen are all parts of a project that should be discussed. Ask for the quote to separate what is being retained from what is being replaced, and identify decoration, disposal and other trade work. This guide gives no standard prices because a general figure cannot establish what your particular home needs.
Finding a local carpenter for the right project
When searching for a carpenter near me, check two things independently: whether the business covers your address and whether it offers the job you need. A broad description such as property services is not a promise to undertake every repair. DP's service pages set out its main offerings, and the county and main-area hubs describe coverage without requiring a separate page for every town or postcode.
Kent is the base area; the other hubs explain South East London, east Surrey and the northern East Sussex border coverage. Use the relevant hub to understand the area, then send the actual postcode with your enquiry. Do not assume a nearby county label means its entire coastline or every borough is covered. Include access restrictions and the type of property so the enquiry can be considered in the context of the real job.
When to ask for advice and what to prepare
Ask before buying doors, cabinets or flooring if you are unsure about dimensions or compatibility. Retail sizes do not settle the condition of an old lining, and a sketch of a wardrobe does not establish the room's finished measurements. If building work is still under way, make clear whether plastering and floor levels are final. An early conversation can identify what must be settled before the final measure rather than treating provisional dimensions as fixed.
Prepare a short description, wide photos of the room and close-ups of the relevant detail. Add approximate measurements if available, but leave final fitting dimensions to the agreed survey. Tell the carpenter which items you have already chosen and send the product information. Finally, say whether the work is a standalone improvement or part of a larger renovation. That distinction helps establish how installation fits around the rest of the project.
Questions we're asked about this
Does a carpenter fit wardrobes and bookcases?
Fitted wardrobes, alcove units and bespoke shelving are listed on DP's storage service page. These combine making or assembling the furniture with fitting it accurately to the room. Describe the contents, available space and finish when asking for a quote.
Should I contact a carpenter before buying internal doors?
If the opening, frame condition or required size is uncertain, ask before ordering. The existing lining, floor clearance and hardware affect the fitting work. A product's advertised size is not a substitute for checking the opening it will go into.
Is a carpenter the same as a handyman?
Not necessarily. Carpentry focuses on timber, joinery and accurate fitting; handyman work is a broader label for varied household tasks. Choose by the actual service offered and the project you need, rather than assuming either title includes every repair.
Can carpentry be planned alongside a kitchen renovation?
Yes. Cabinet fitting, worktops, flooring and trim need to fit around preparation and other trades. DP lists kitchen installations and refits within renovation. Agree the scope and sequence, including who handles services and finishing, before the installation starts.
Describe the carpentry project you have in mind
Send the postcode, photos and the change you want to make. Choose the relevant service below, or use the enquiry form to explain the project.
Get a free quote
Reply within 24 hours - No obligation
